MODEL | AP9106S |
Capacity | 6000VA / 6000W |
INPUT | |
Input wiring | Single-phase three-wire (1Φ + N + PE) |
Rated voltage | 208 / 220 / 230 / 240 Vac |
Voltage range | 110 ~ 176 Vac (linear derating between 50% and 100% load); 176 ~ 288 Vac (no derating) |
Rated frequency | 50 I 60 Hz (auto-sensing) |
Frequency range | 40 ~ 70 Hz |
Power factor | ≥ 0.99 |
Bypass voltage range | - 40% ~ +15% (settable) |
Total harmonic distortion (THDi) | ≤ 5% |
OUTPUT | |
Output wiring | Single-phase three-wire (1Φ + N + PE) |
Rated voltage | 208 (PF=0.9) / 220 / 230 / 240 Vac |
Voltage regulation | ± 1% |
Frequency | Synchronized to bypass in mains mode; 50 / 60 Hz± 0.1% Hz in battery mode |
Waveform | Sinusoidal |
Power factor | 1 |
Total harmonic distortion (THDv) | ≤ 1% (linear load); ≤ 4% (non-linear load) |
Crest factor | 3:1 |
Overload | 105% ~ 110% for 10 min, 110% ~ 125% for 1 min,126% ~ 150% for 30 s |
BATTERIES | |
DC voltage | 192 Vdc |
Number of battery | 16 pcs |
Inbuilt battery (standard model) | 12V/7Ah x 16 |
Charging current | 1A |
Recharge time | 90% capacity restored in 8 hours; |
SYSTEM | |
Efficiency | ≥ 94% at 100% load, max. 95% at 60% load, ≥ 98% in ECO mode |
Transfer time | 0ms |
Protections | Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure |
Max. number of parallel connections | 4 |
Communications | RS232 (standard), USB / RS485 / dry contacts / SNMP / battery temperature compensation (optional) |
Display | LCD+ LED |
OTHERS | |
Operating temperature | 0℃ ~ 40℃ |
Storage temperature | -25℃ ~ 55℃ (without battery) |
Relative humidity | 0 ~ 95% (non-condensing) |
Altitude | ≤ 1000 m, derating 1% for each additional 100 m |
IP rating | IP20 |
Noise level at 1 m | ≤ 55 dB |
Dimensions (W x D x H)(mm) |
191 × 465 × 711 |
Packaged dimensions (W x D x H)(mm) |
310 × 654 × 941 |
Net weight(kg) | 53.00 |
Gross weight(kg) | 61.00 |